Durarail Aluminum Railings: Care & Cleaning

Duradek Vinyl Deck Membrane and Durarail Aluminum Railings

U.S.A.: 800-338-3568

Canada: 866-591-5594

Care and Cleaning of Durarail Aluminum Railing Systems

The Durarail Aluminum Railing System is the finest railing system available on the market today. Precision welded to the highest standards combined with Powder coating ensures a tough, maintenance free finish.

Fasteners

The only regular maintenance other than cleaning is inspecting the fasteners. It is the responsibility of the owner to inspect these areas once a year. Over time fasteners may loosen and need to be tightened down as necessary.

We recommend a light coat of floor or car wax be applied to the tops of any exposed fasteners every 3-6 months to help prevent oxidation (more often if you are located in a high UV and salt spray climates). Surface rust is a normal part of the aging process. This does not affect the integrity and strength of the fastener.

Natural Aging Process

During the natural aging process of the Powder Coating you may notice a white 'chalk' or powder that forms on the surface. This is normal and can be cleaned and polished (Using 'Vim', 'Soft Scrub' or a cut-polish) to bring back the sheen.

General Cleaning

Your railing should be cleaned at least twice a year with a mild, non-abrasive soap and water, using a soft sponge. In areas where salts and pollutants are more prevalent (beach front or industrial areas) then the railings should be cleaned more frequently. Always rinse with fresh water to remove any residual soap.

Avoid using a dry sponge, which may scratch the surface.
Use regular glass cleaner for glass.
To remove minor scuffmarks or scratches use 'Soft Scrub' or 'Vim' or equivalent mild or nonabrasive products.
To remove paint or sealant spots use Methylated Spirits, Turpentine, White Spirits, Alcohol or Isopropanol.
Always remove any sap, tree seeds, bugs, etc. as soon as possible, as sun exposure and heat will make them more difficult to remove.
Certain household cleaners, abrasive agents, harsh chemicals, strong solvents, acids, steel wool and industrial cleaners can cause damage and discoloration to the finish and are not recommended.
Always test a small, inconspicuous area before applying any product to Durarail.